AlbuquerqueRecruiter
the smart solution for Albuquerque jobs

18-SOL-0731 - Composite NC Machinist - Programmer/Operator

Company: SolAero Technologies
Location: Albuquerque
Posted on: January 15, 2019

Job Description:

-Relocation assistance available for the right candidate - SolAero Technologies Corp. is one of the worlds leading manufacturers of highly efficient radiation-hard solar cells, Coverglass Interconnected Cells (CIC), and solar panels for space power applications. Since 2001, SolAero solar cells or panels have supplied primary power to over 170 successful space missions with zero on-orbit failures. The Companys proven manufacturing capability, technology leadership and unsurpassed reliability makes SolAero the supplier of choice for demanding space programs. DESCRIPTION: The CNC Programmer/Operator Tech III is responsible for set-up, operation, and programming of CNC routing and milling machines with minimal supervision of tasks on a daily basis. ESSENTIAL DUTIES AND RESPONSIBILITES: Operates computing equipment to access job information (e.g., drawings, specifications and other online information systems) and perform job tasks (e.g., post/upload/download programs, create/edit CNC programs). Edits and performs programming of CNC machines. Performs typical machine shop operations with minimal supervision to support the trimming and routing of metal and composite Space Flight hardware. Detects and reports defective materials or questionable conditions to the department supervisor. Maintains the work area and equipment in a clean orderly condition and follows prescribed safety regulations. Performs but not limited to the following tasks: milling, drilling, taping, de-burring, and all bench operations. Receives minimal supervision and assistance with regard to machine set-up. Advise and assist the Composites Fabrication Supervisor in keeping a minimum acceptable inventory level of standard and common machine tools, cutters, and bits to eliminate down time related to procurement lead times. Contribute to meeting production rates by participating in schedule requirement reviews and brainstorming activities to reduce processing time and increase throughput while producing hardware at an acceptable level of quality and meeting Customer requirements. Carries out tasks using basic hand tools including calipers, micrometers, gauge pins, scales, height gauges. Support internal R&D efforts and may fabricate, assemble, disassemble, rework, modify and reassemble various piece-parts, tools, mechanisms and sub-assemblies in accordance with applicable instructions and/or specifications. Operate conventional/manual equipment including horizontal, chopsaws, pedestal grinders and vertical band saws. Will be cross-trained to perform Composites Fabrication functions including lamination, panel consolidation, assembly, mixing and bonding with 2-part adhesives. Duties and responsibilities may be added, deleted, modified, or changed at any time at the Companys discretion. Changes may be made formally, informally either verbally or in writing. All other duties as requested. QUALIFICATIONS High-School diploma or GED. Entry level, 0-2 years experience in the aerospace composites industry. Machine shop (metal or composite) experience preferred. KNOWLEDGE, SKILLS & ABILITIES: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skills and/or ability required. Set-up and operate 3-axis NC routing and milling machines. Ability to use various types of hand tools, measuring tools, and hand-held power tools. Ability to follow written Work instructions and use simple math. Ability to program and operate MasterCam, X Series. Ability to work with common drawing files including .stp, .dwg,. iges, and .dxf. Strong GD&T skills and knowledge of ANSI 1994. Knowledge of the coordinate system to identify multiple axes (e.g., X,Y,Z). Ability to sequence and layout own work and perform any bench work necessary to finish parts to quality specifications. Knowledge of machine shop theory and procedures, and machinability of composites materials (e.g., cutting speed and feed rates for materials). Capable of lifting up to 50 lbs. Must be capable of passing a respiratory training program that will allow you to use a half face respirator as necessary to perform daily operations. Ability to listen and take direction. Individual must be detail oriented, organized and capable of maintaining a clean clutter-free work area Possesses an interest and willingness to learn Ability to speak, read, and write English and comprehend written work instructions. MUST BE A U.S. CITIZEN OR GREEN CARD HOLDER All qualified applicants will receive consideration for employment without regard to race, sex, color, religion, national origin, protected veteran status, or on the basis of disability. TO BE CONSIDERED FOR THIS POSITION, PLEASE VISIT OUR WEBSITE: WWW.SOLAEROTECH.COM AND FILL OUT AN APPLICATION AND UPLOAD A RESUME Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractors legal duty to furnish information. Term: CNC Machinist

Keywords: SolAero Technologies, Albuquerque , 18-SOL-0731 - Composite NC Machinist - Programmer/Operator, IT / Software / Systems , Albuquerque, New Mexico

Click here to apply!

Didn't find what you're looking for? Search again!

I'm looking for
in category
within


Other IT / Software / Systems Jobs


Software Engineer ($45k-$57k year)
Description: br Revature is the fastest growing employer of emerging technology talent in the US and we are currently looking to hire over 100 new Software Engineers. br Our Software Engineers design, analyze (more...)
Company: Revature
Location: Albuquerque
Posted on: 01/14/2019

253985BR - Retail Operations Specialist
Description: Job Description : Job Summary Here's your opportunity to join an unstoppable team at a company that's setting a new standard in wireless. This position puts you on the leading edge of a brand that is (more...)
Company: Sprint
Location: Albuquerque
Posted on: 01/14/2019

Software Engineer ($45k-$57k year)
Description: Revature is the fastest growing employer of emerging technology talent in the US and we are currently looking to hire over 100 new Software Engineers. Our Software Engineers design, analyze and build (more...)
Company: Revature
Location: Albuquerque
Posted on: 01/12/2019


Travel Emergency Room RN
Description: Supplemental Health Care is a nationally recognized healthcare staffing provider partnering with a hospital in Albuquerque, New Mexico to provide
Company: Supplemental Health Care
Location: Albuquerque
Posted on: 01/15/2019

Current College Students - Computer Programming Tutor (more than $1k+/mo)
Description: Varsity Tutors is looking to contract with tutors to connect with clients across a variety of academic subjects and major test prep through Varsity Tutors' platform. There are many benefits of tutoring (more...)
Company: Varsity Tutors
Location: Santa Fe
Posted on: 01/15/2019

Current College Students - Cloud Functions Software Developer Engineer
Description: DigiPops.TV is a short film peer review,
Company: DigiPops (MME, LLC)
Location: Albuquerque
Posted on: 01/15/2019

College Graduates - Beta Tester
Description: Whether you are new to WayUp or have used it for ages, we're looking
Company: Demo Company
Location: Albuquerque
Posted on: 01/18/2019

Current College Students - Part-Time Remote Backend Developers
Description: Candidate will be responsible
Company: BrawtaSports Network
Location: Albuquerque
Posted on: 01/13/2019

46R Public Affairs Broadcast Specialist
Description: As society becomes more accustomed to getting its news online via websites, video, or broadcast TV or radio, the Army National Guard needs Public Affairs Broadcast Specialists to tell the Guard's story. (more...)
Company: Army National Guard
Location: Santa Fe
Posted on: 01/17/2019

WEB ANALYST III
Description: Position Summary: Experience preferred in Docker and Ruby on Rails. Web analyst for creating online business focused applications to improve service to our staff and patients. Design, code and test web-based (more...)
Company: University of New Mexico Hospital
Location: Albuquerque
Posted on: 01/15/2019

Log In or Create An Account

Get the latest New Mexico jobs by following @recnetNM on Twitter!

Albuquerque RSS job feeds